1 1
Ushio

1000338 Ushio ENX-5 360W 86V MR16 GY5.3 Clear Halogen Lamp
15.84 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match the exact manufacturer or ANSI code, wattage, voltage or current rating, base, bulb/reflector form, dimensions, filament, and operating position shown below. Similar-looking halogen lamps are not automatically interchangeable.

Need help confirming fit? Email help@dynamiclamps.com with the equipment manufacturer, model, and existing lamp marking.

Specifications

1000338 Ushio ENX-5 360W 86V MR16 GY5.3 Clear Halogen Lamp specifications

Shopify SKU USH-1000338
Product detail This lamp can be used in place of the standard ENX lamp
Electrical rating 360 Watts 86 Volts
Configuration Single Ended
Base / connection GY5.3 Bi-Pin Base
Bulb / form MR-16 Bulb Type
Rated average life 75 Hours Rated Average Life
Color temperature 3300K Color Temp
Filament CC-8 Filament
Optical / finish Clear Lamp
Optical / finish Faceted Reflector
Maximum overall length 1.689 in (43.3 mm) Max Overall Length
Bulb / form 2.0 in (50.8 mm) Bulb Diameter
Other part numbers 02610, 19475, 54913, JCR86V-360W
Equipment compatibility

Equipment and application fit

Used in overhead projectors

  • Use only in equipment whose lamp list and electrical, optical, thermal, and mechanical design specify this exact lamp or a fully documented equivalent.

Socket fit alone does not establish compatibility. The equipment label, current service manual, and installed-lamp marking take precedence.

Brand alternatives

Cross-reference search aids

02610, 19475, 54913, JCR86V-360W

Confirm any substitute against the complete electrical, mechanical, optical, filament, dimensional, and operating specification. A shared ANSI code may identify a lamp family but does not override equipment requirements.

Documentation & safety

Manufacturer documentation and handling

Halogen safety: Disconnect power and allow the equipment to cool before service. Install only in approved enclosed equipment with the required protective screen, ventilation, electrical controls, and shielding. Handle quartz with clean gloves or lint-free tissue and avoid touching the envelope with bare skin.