1 1
Ushio

1000350 Ushio EPZ 50W 13.8V GX5.3 Clear Halogen Lamp
27.81 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match the exact manufacturer or ANSI code, wattage, voltage or current rating, base, bulb/reflector form, dimensions, filament, and operating position shown below. Similar-looking halogen lamps are not automatically interchangeable.

Need help confirming fit? Email help@dynamiclamps.com with the equipment manufacturer, model, and existing lamp marking.

Specifications

1000350 Ushio EPZ 50W 13.8V GX5.3 Clear Halogen Lamp specifications

Shopify SKU USH-1000350
Electrical rating 50 Watts 13.8 Volts
Configuration Single Ended
Bulb / form MR16 Bulb Type
Base / connection GX5.35 Base
Working distance 4.25 in (108 mm) Working Distance
Color temperature 3150K Color Temp
Rated average life 1000 Hours Rated Average Life
Light output 80 Lumens
Optical / finish Clear Lamp
Optical / finish Specular Reflector
Maximum overall length 1.75 in (44.5 mm) Max Overall Length
Bulb / form 1.99 in (50.67 mm) Bulb Diameter
Other part numbers 54743, EPZ 64608 50W 13V 24/CS 1/SKU, JCR13.8V-50W
Equipment compatibility

Equipment and application fit

Used in microscopy, stage, studio, UV curing, medical and surgical overhead lighting

  • Use only in equipment whose lamp list and electrical, optical, thermal, and mechanical design specify this exact lamp or a fully documented equivalent.

Socket fit alone does not establish compatibility. The equipment label, current service manual, and installed-lamp marking take precedence.

Brand alternatives

Cross-reference search aids

54743, EPZ 64608 50W 13V 24/CS 1/SKU, JCR13.8V-50W

Confirm any substitute against the complete electrical, mechanical, optical, filament, dimensional, and operating specification. A shared ANSI code may identify a lamp family but does not override equipment requirements.

Documentation & safety

Manufacturer documentation and handling

Halogen safety: Disconnect power and allow the equipment to cool before service. Install only in approved enclosed equipment with the required protective screen, ventilation, electrical controls, and shielding. Handle quartz with clean gloves or lint-free tissue and avoid touching the envelope with bare skin.