1 1
Osram

54656 Osram EGK 1000W 120V P28s T6 Halogen Stage Lamp
27.75 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match the exact manufacturer or ANSI code, wattage, voltage or current rating, base, bulb/reflector form, dimensions, filament, and operating position shown below. Similar-looking halogen lamps are not automatically interchangeable.

Need help confirming fit? Email help@dynamiclamps.com with the equipment manufacturer, model, and existing lamp marking.

Specifications

54656 Osram EGK 1000W 120V P28s T6 Halogen Stage Lamp specifications

Shopify SKU OSR-EGK
Electrical rating 1000 Watts 120 Volts
Configuration Single Ended
Base / connection P28s Medium Pre-Focus Base
Bulb / form T6 Bulb Type
Rated average life 400 Hours Rated Average Life
Light output 24500 Lumens
Color temperature 3200K Color Temp
Color rendering index 100 CRI
Filament CC-8 Filament
Optical / finish Clear Bulb
Maximum overall length 5.698 in (146.1 mm) Max Overall Length
Bulb / form .787 in (20 mm) Bulb Diameter
Other part numbers 02050, 88614, 1000279, JCV120V-1000WCF
Equipment compatibility

Equipment and application fit

Used in projector, microfilm, stage, video, and film lighting

  • Use only in equipment whose lamp list and electrical, optical, thermal, and mechanical design specify this exact lamp or a fully documented equivalent.

Socket fit alone does not establish compatibility. The equipment label, current service manual, and installed-lamp marking take precedence.

Brand alternatives

Cross-reference search aids

02050, 88614, 1000279, JCV120V-1000WCF

Confirm any substitute against the complete electrical, mechanical, optical, filament, dimensional, and operating specification. A shared ANSI code may identify a lamp family but does not override equipment requirements.

Documentation & safety

Manufacturer documentation and handling

Halogen safety: Disconnect power and allow the equipment to cool before service. Install only in approved enclosed equipment with the required protective screen, ventilation, electrical controls, and shielding. Handle quartz with clean gloves or lint-free tissue and avoid touching the envelope with bare skin.