1 1
Dynamic Lamps

Turntable Belt for SHARP Models CMS-2 RP-103 RP-107 RP-117
5.0 (1 review)
7.99 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Confirm the complete equipment model SHARP CMS-2 RP-103 RP-107 RP-117 and match replacement reference FBM 20.0. Production revisions can use different mechanisms, and an old belt or tire may have stretched.

Need help confirming fit? Email help@dynamiclamps.com with the manufacturer, model, and clear photos of the equipment label and old part.

Specifications

FBM 20.0 drive belt specifications

Belt code FBM 20.0
Type Flat belt
Circumference 20.0 in. (50.8 cm)
Width .19 in. (5.0 mm)
Thickness .04 in. (1.0 mm)
Material Rubber
Country of origin Taiwan
Equipment compatibility

Compatible-equipment references

The list below consolidates the established Dynamic Lamps applications for the exact FBM 20.0 family. Notes about belt position or quantity remain part of the fit reference.

  • SHARP CMS-2 RP-103 RP-107 RP-117
  • DUAL CS-455 CS-520 CS-521 CS-530 CS-540
  • Dual: CS-455, CS-520, CS-521, CS-530, CS-540, CS455, CS520, CS521, CS530, CS540
  • DUAL CS-502 CS-1241 CS-1242 CS-1245 CS-2110
  • DUAL CS-514 CS-502-1 CS-545 CS-2210 CS-2215
  • Dual: CS-514, CS-502-1, CS-545, CS-2210, CS-2215, CS514, CS502-1, CS545, CS2210, CS2215
  • KENWOOD KP-3020
  • Kenwood: KP-3020, KP3020
  • ORACLE DELPHI MK III
  • Oracle: DELPHI, MK, III
  • Sharp: CMS-2, RP-103, RP-107, RP-117, CMS2, RP103, RP107, RP117
  • SHARP CPF-800 SG-F800
  • Sharp: CPF-800, SG-F800, CPF800, SGF800
  • THORENS TD-146
  • Thorens: TD-146, TD146
  • THORENS TD-110 TD-115 TD-126
  • Thorens: TD-110, TD-115, TD-126, TD110, TD115, TD126
  • THORENS TD-166 TD-160MKII TD-170
  • Thorens: TD-166, TD-160MKII, TD-170, TD166, TD160MKII, TD170
  • THORENS TD-125 TD-145 TD-160 TD-165
  • Thorens: TD-125, TD-145, TD-160, TD-165, TD125, TD145, TD160, TD165
  • DUAL CS-1236 CS-1237
  • Dual: CS-1236, CS-1237, CS1236, CS1237
  • DUAL CS-1246 CS-1249
  • Dual: CS-1246, CS-1249, CS1246, CS1249
  • THORENS TD-166 MKII TD-280 TD-320 MKII
  • Thorens: TD-166, MKII, TD-280, TD-320, TD166MKII, TD280, TD320MKII
  • THORENS TD-320 TD-115BZW
  • Thorens: TD-320, TD-115BZW, TD320, TD115BZW
  • DUAL CS-1237
  • DUAL CS-1236
  • DUAL CS-1246
  • DUAL CS-1249
  • DUAL CS-520
  • DUAL CS-455
  • DUAL CS-521
  • DUAL CS-530
  • DUAL CS-540
  • DUAL CS-502
  • DUAL CS-1241
  • DUAL CS-2110
  • DUAL CS-1245
  • DUAL CS-1242
  • DUAL CS-514
  • DUAL CS-545
  • DUAL CS-502-1
  • DUAL CS-2210
  • DUAL CS-2215
  • SHARP CMS-2
  • SHARP RP-103
  • SHARP RP-107
  • SHARP RP-117
  • SHARP CPF-800
  • SHARP SG-F800
  • THORENS TD-110
  • THORENS TD-115
  • THORENS TD-126
  • THORENS TD-125
  • THORENS TD-145
  • THORENS TD-160
  • THORENS TD-165
  • THORENS TD-166
  • THORENS TD-160MKII
  • THORENS TD-170
  • THORENS TD-320
  • THORENS TD-115BZW

Model suffixes and production revisions can use different mechanisms. The service manual, model plate, and original part path take precedence.

Related products and fit checks

Before choosing another size

No different size or profile is presented as an automatic substitute for FBM 20.0. Circumference, width, thickness, cross-section, installed tension, and operating position all affect performance.

Installation and safety

Installation guidance

  1. Disconnect power and remove the platter or access cover as directed by the equipment manual.
  2. Remove belt residue and clean the motor pulley and belt path without leaving oil.
  3. Install the belt in the specified path without twists, then rotate the mechanism by hand before powering it.

Follow the current equipment service instructions when they differ from this general guidance.