1 1
Dynamic Lamps

Cassette Deck Drive Belt for Sony TC-W511 – SBS 2.9
7.99 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match the complete equipment model Sony TC-W511 and the replacement reference SBS 2.9. Similar model numbers can use different mechanisms.

Quantity required: Sold per belt. The required quantity for the exact TC-W511 designation has not been independently established; confirm the complete model and original belt positions before ordering.

Other application references to verify: FBS8.0, SBS5.6. Exact TC-W511 applicability requires confirmation. Those belts are different sizes or profiles and are sold separately; SBS 2.9 alone is not a complete belt kit.

Fit check: Confirm the complete equipment model and belt position before ordering.

Specifications

SBS 2.9 specifications

Belt code SBS 2.9
Supplier reference 130-510
Inside circumference Approx. 2.9 in. (7.4 cm)
Profile Small square rubber drive belt
Cross-section Approx. 1.2 mm × 1.2 mm
Sony reference Exact TC-W511 original part reference requires confirmation; do not transfer TC-WR511 parts
Equipment compatibility

Model and replacement reference

Brand: Sony
Model: TC-W511
Replacement belt: SBS 2.9

Service documentation, the equipment model plate, and the original belt path take precedence where they differ.

Exact-model check: This page names TC-W511. The reviewed Sony service document names TC-WR511, a different designation. Exact-model identity and the original part corresponding to this replacement require confirmation; do not assume the two designations or their components are interchangeable.

Other belts in this machine

Other application references to verify: FBS8.0, SBS5.6. Exact TC-W511 applicability requires confirmation. Those belts are different sizes or profiles and are sold separately; SBS 2.9 alone is not a complete belt kit.

Installation guidance
  1. Disconnect power and follow the model service procedure.
  2. Remove residue and clean the belt path without leaving oil.
  3. Install without twists and cycle the mechanism by hand before applying power.