1 1
Dynamic Lamps

130-800 Replacement Pinch-Roller Tire for TEAC and Akai Reel-to-Reel Decks
14.99 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

This is a tire-only replacement for the TEAC/TASCAM pinch-roller family. The metal roller, cap, arm, and bearing are not included.

Measure the removed tire and existing hub before ordering. Nominal reference: 32 mm outside diameter × 17 mm inside diameter × 13 mm width/wall. Verify the dimension orientation and hub/profile because production revisions can differ.

Specifications
Shopify SKU GEN-130-800
Supplier references 130-800 / HES-130-800
TEAC references 50141751 / 5014175100
Type Replacement rubber pinch-roller tire only
Nominal dimensions Approx. 32 mm OD × 17 mm ID × 13 mm width/wall; measure original
Equipment compatibility

Published references include the TEAC/TASCAM 22-2, 22-4, 30-4, 32-2B, 388, A-series models A-1400 through A-6300MK2, and X-series models X-3, X-7R, X-7RMK2, X-10 family, X-20R, X-700R, X-1000 family, and X-2000 family.

Exceptions: TASCAM 32 is not confirmed; some 30-series units use a reduced-height tire and different cap; X-3R and X-3 MkII are not supported.

The model plate, service manual, and measured original part take precedence.

Part-number cross references
  • 130-800
  • HES-130-800
  • TEAC 50141751 / 5014175100

Do not substitute 130-801; it is a separately identified Pioneer tire.

Installation & care
  1. Disconnect power before servicing.
  2. Remove deteriorated rubber and clean the hub/mating surface.
  3. Install evenly; verify free rotation, alignment, and tape path.
  4. Use the equipment service manual for pressure and transport adjustments.