1 1
Osram

64319Z 59011 Osram 45W 6.8V PK30D Clear Halogen Lamp
22.31 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match the exact manufacturer or ANSI code, wattage, voltage or current rating, base, bulb/reflector form, dimensions, filament, and operating position shown below. Similar-looking halogen lamps are not automatically interchangeable.

Need help confirming fit? Email help@dynamiclamps.com with the equipment manufacturer, model, and existing lamp marking.

Specifications

64319Z 59011 Osram 45W 6.8V PK30D Clear Halogen Lamp specifications

Shopify SKU OSR-64319Z
Product detail FAA Approved
Electrical rating 45 Watts 6.8 Volts
Configuration Single Ended
Base / connection PK30D Base w/Flat Male Connectors
Rated average life 1500 Hours Rated Average Life
Light output 800 Lumens
Color temperature 3000K Color Temp
Light-center length .787 in (20 mm) Light Center Length (LCL)
Optical / finish Clear Bulb
Maximum overall length 1.968 in (50 mm) Max Overall Length
Bulb / form .531 in (13.5 mm) Bulb Diameter
Other part numbers 59011. 6.6A 64319Z 45-15 PK30D
Equipment compatibility

Equipment and application fit

Used in approach, threshold, runway end, edge, and stopbar airfield lighting

  • Use only in equipment whose lamp list and electrical, optical, thermal, and mechanical design specify this exact lamp or a fully documented equivalent.

Socket fit alone does not establish compatibility. The equipment label, current service manual, and installed-lamp marking take precedence.

Brand alternatives

Cross-reference search aids

59011. 6.6A 64319Z 45-15 PK30D

Confirm any substitute against the complete electrical, mechanical, optical, filament, dimensional, and operating specification. A shared ANSI code may identify a lamp family but does not override equipment requirements.

Documentation & safety

Manufacturer documentation and handling

Halogen safety: Disconnect power and allow the equipment to cool before service. Install only in approved enclosed equipment with the required protective screen, ventilation, electrical controls, and shielding. Handle quartz with clean gloves or lint-free tissue and avoid touching the envelope with bare skin.