1 1
Osram

64320 58846 Osram EXM 45W 6.6A GZ9.5 Clear Halogen Lamp
14.99 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match the exact manufacturer or ANSI code, wattage, voltage or current rating, base, bulb/reflector form, dimensions, filament, and operating position shown below. Similar-looking halogen lamps are not automatically interchangeable.

Need help confirming fit? Email help@dynamiclamps.com with the equipment manufacturer, model, and existing lamp marking.

Specifications

64320 58846 Osram EXM 45W 6.6A GZ9.5 Clear Halogen Lamp specifications

Shopify SKU OSR-EXM
Electrical rating 45 Watts 6.6 Amps
Configuration Single Ended
Base / connection GZ9.5 2 Pin Pre-focus Base
Rated average life 1500 Hours Rated Average Life
Light output 875 Lumens
Color temperature 3200K Color Temperature
Color rendering index 100 CRI
Light-center length 1.0 in (25.4 mm) Light Center Length (LCL)
Optical / finish Clear Lamp
Maximum overall length 1.75 in (44.5 mm) Max Overall Length
Bulb / form .453 in (11.5 mm) Bulb Diameter
Other part numbers 58846, 6.6A 64320 45W EXM GZ9.5 12/CS 1/SKU
Equipment compatibility

Equipment and application fit

Used in airfield lighting

  • Use only in equipment whose lamp list and electrical, optical, thermal, and mechanical design specify this exact lamp or a fully documented equivalent.

Socket fit alone does not establish compatibility. The equipment label, current service manual, and installed-lamp marking take precedence.

Brand alternatives

Cross-reference search aids

58846, 6.6A 64320 45W EXM GZ9.5 12/CS 1/SKU

Confirm any substitute against the complete electrical, mechanical, optical, filament, dimensional, and operating specification. A shared ANSI code may identify a lamp family but does not override equipment requirements.

Documentation & safety

Manufacturer documentation and handling

Halogen safety: Disconnect power and allow the equipment to cool before service. Install only in approved enclosed equipment with the required protective screen, ventilation, electrical controls, and shielding. Handle quartz with clean gloves or lint-free tissue and avoid touching the envelope with bare skin.