1 1
Dynamic Lamps

Audio Drive Belt for JCPenney 853-0461 – FBM 10.5
8.99 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match the complete equipment model and the replacement reference FBM 10.5. Belt path, width, profile, and installed tension must match; aged belts may have stretched.

Need help confirming fit? Email help@dynamiclamps.com with the manufacturer, model, and clear photos of the equipment label and old belt.

Quantity note: Sold individually. Some equipment uses more than one belt, but its other belts may use a different size or profile. Order more than one only when service documentation specifies this same belt in multiple positions.

Specifications

FBM 10.5 drive belt specifications

Belt code FBM 10.5
Supplier reference 130-565
Inside circumference Approx. 10.5 in.
Profile Medium flat rubber drive belt
Width Approx. 0.20 in. (5 mm)
Thickness Approx. 0.029 in. (0.7 mm)
Equipment compatibility

Confirmed equipment and part references

This belt is cataloged for the following specific references. Use the exact model or part number; similar equipment can use a different belt.

  • Fisher MC-3010
  • Motorola TM2265
  • Automatic Radio Model 23
  • JCPenney / Penncrest / MCS 853-3507
  • JCPenney / Penncrest / MCS 853-0461
  • Motorola part 424081G01
  • Motorola part 4243114C01
  • Sanyo / Fisher part 132-91851700
  • Sanyo / Fisher part 132-91734700
  • Aiwa CS-600, CS-660, CS-770, and CS-880 cassette decks (main flat drive belt)
  • Onkyo DXC-110
  • Sanyo part 131-2-4804-00120
  • Zenith M900P, M902P, MC6010, MC6020, MD912AE, MD919P, MR915P, MR916PN, MR917M, MR920AE, ND902P, and SL-2597-P9
  • Zenith parts 832207, 96951, 96954

Service documentation, model plate, belt path, and original part dimensions take precedence where they differ.

Related products and fit checks

Before choosing another size

No other belt size or profile is an automatic substitute. Confirm circumference, width, thickness, cross-section, belt path, and operating position before ordering.

Installation guidance
  1. Disconnect power and open the equipment as directed by its service documentation.
  2. Remove residue and clean the pulley and belt path without leaving oil.
  3. Install without twists and turn the mechanism by hand before powering the equipment.