1 1
Hikari

JCD-6007 Hikari JCD130V 20W GY6.35 Clear Halogen Lamp
5.40 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match the exact manufacturer or ANSI code, wattage, voltage or current rating, base, bulb/reflector form, dimensions, filament, and operating position shown below. Similar-looking halogen lamps are not automatically interchangeable.

Need help confirming fit? Email help@dynamiclamps.com with the equipment manufacturer, model, and existing lamp marking.

Specifications

JCD-6007 Hikari JCD130V 20W GY6.35 Clear Halogen Lamp specifications

Shopify SKU GEN-JCD-6007
Electrical rating 20 Watts 130 Volts
Base / connection GY6.35, 2 Pin Base
Rated average life 2000 Hours Rated Average Life
Light output 180 Lumens
Color temperature 2700K Color Temp
Optical / finish Clear Lamp
Maximum overall length 1.89 in (48.0 mm) Max Overall Length
Bulb / form .49 in (12.5 mm) Bulb Diameter
Other part numbers JCD6007, JCD130V-20W/GY6.35
Equipment compatibility

Equipment and application fit

Used in home and office lighting

  • Use only in equipment whose lamp list and electrical, optical, thermal, and mechanical design specify this exact lamp or a fully documented equivalent.

Socket fit alone does not establish compatibility. The equipment label, current service manual, and installed-lamp marking take precedence.

Brand alternatives

Cross-reference search aids

JCD6007, JCD130V-20W/GY6.35

Confirm any substitute against the complete electrical, mechanical, optical, filament, dimensional, and operating specification. A shared ANSI code may identify a lamp family but does not override equipment requirements.

Documentation & safety

Manufacturer documentation and handling

No manufacturer data-sheet link is attached to this record. Confirm the current lamp marking and equipment documentation before installation.

Halogen safety: Disconnect power and allow the equipment to cool before service. Install only in approved enclosed equipment with the required protective screen, ventilation, electrical controls, and shielding. Handle quartz with clean gloves or lint-free tissue and avoid touching the envelope with bare skin.