1 1
Osram

69802 OSRAM P-VIP 200/0.8 E20.8A 200W Projector Bare Lamp
56.62 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match OSRAM 69802 / P-VIP 200/0.8 E20.8a on the removed lamp or service documentation. This is a bare high-pressure projector lamp, not a complete lamp module or housing.

Specifications

OSRAM 69802 P-VIP projector lamp specifications

Manufacturer OSRAM
Manufacturer product number 69802
Lamp designation P-VIP 200/0.8 E20.8a
Product format Original bare projector lamp with reflector
Power range 160–200 W
Maximum power 200 W
Arc gap 0.8 mm
Reflector shape / size Elliptical / approximately 51 mm
Maximum overall length Approximately 62.5 mm
Rated life Approximately 6,000 hours
Warranty 90 days for website orders
Equipment compatibility

Compatible equipment

  • Acer H5360
  • Acer H5360BD
  • Acer P1166P
  • Acer P1266I
  • Acer P1266P
  • Acer S1200
  • Dell 1410X
  • Optoma ES529
  • Optoma EX538
  • Optoma PRO160S
  • Optoma PRO260X
  • Optoma PRO360W
  • Optoma XE3303
  • SMART Board UF55
  • SMART Board UF55W
  • SMART Board UF65
  • SMART Board UF65W

These references identify equipment families reported with this lamp geometry. Projector revisions can differ; confirm the removed lamp, module part number, reflector dimensions, wiring, cooling, and service documentation.

Search and module references: Acer EC.J8000.001, Acer EC.J8000.002, Dell 330-6183, Dell 725-10196, Optoma BL-FP180D, Optoma BL-FP200H, Optoma SP.8FE01GC01, SMART Board 20-01032-20

Related products and fit checks

Before choosing another lamp

No direct substitute is mapped for OSRAM 69802 / P-VIP 200/0.8 E20.8a. Similar-looking P-VIP lamps may differ in arc gap, reflector, power range, alignment, connector arrangement, or ignition requirements.

Documentation, installation and safety

Manufacturer documentation

OSRAM P-VIP replacement-lamp technical table (PDF)

Installation guidance

  • Installation into a lamp housing requires correct alignment and clean handling.
  • Do not touch the burner or reflector with bare hands.
  • Use the projector's complete cooling, shielding, ignition, and interlock system.
  • Allow full cooling and disconnect power before service.

Follow the current equipment service instructions when they differ from this general guidance.