1 1
Osram

69791 OSRAM P-VIP 280/1.0 E20.6A 280W Projector Bare Lamp
94.99 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

Match OSRAM 69791 / P-VIP 280/1.0 E20.6a on the removed lamp or service documentation. This is a bare high-pressure projector lamp, not a complete lamp module or housing.

Specifications

OSRAM 69791 / P-VIP 280/1.0 E20.6a specifications

Manufacturer OSRAM
Manufacturer product number 69791
Lamp designation P-VIP 280/1.0 E20.6a
Product format Original bare projector lamp with reflector
Power range 230–280 W
Arc gap 1.0 mm
Reflector shape Elliptical
Rated life Approximately 3,000 hours
Warranty 90 days for website orders
Equipment compatibility

Compatible projectors and lamp-module references

Acer: P7270, P7270i.

Eiki: EIP-S200, EIP-X200, EIP-X280, EIP-X320.

InFocus / ASK Proxima: A3200, IN3104, IN3108.

Mitsubishi: EX52U, EX53E, EX53U, XD470, XD470U, XD500ST, XD520U, XD530U.

NEC: NP4100, NP4100W.

Optoma: TX776 and projectors using BL-FP280E, BL-FU280A, or BL-FP280A lamp modules.

Sharp: projectors using AN-P610LP.

ViewSonic: PJ506, PJ506D, PJ506ED, PJ556, PJ556D, PJ556ED.

Lamp-module references: Acer EC.J6300.001; Eiki P8384-1001 and P8384-1014; InFocus SP-LAMP-042; Mitsubishi VLT-XD470LP and VLT-XD520LP; NEC NP12LP / 60002748; BenQ 9E.0C101.001 and 9E.0C101.011; ViewSonic RLC-018; Vivitek 5811100795-S and 5811100818-S.

Projector revisions can differ. Confirm OSRAM 69791 or P-VIP 280/1.0 E20.6A on the original lamp, module label, or service documentation before ordering.

Related products and fit checks

Before choosing another size

No direct substitute is mapped for OSRAM 69791 / P-VIP 280/1.0 E20.6a. Similar-looking projector lamps may differ in critical dimensions or operating requirements.

Installation and safety

Installation guidance

  • Installation into a lamp housing requires correct alignment and clean handling.
  • Do not touch the burner or reflector with bare hands.
  • Use the projector's complete cooling, shielding, ignition, and interlock system.
  • Allow full cooling and disconnect power before service.

Follow the current equipment service instructions when they differ from this general guidance.