1 1
Dynamic Lamps

Pinch Roller Tire for TEAC/TASCAM Model 32-2B – 130-800
14.99 USD
Shipping calculated at checkout.
In stock

Buy with confidence

Need help confirming compatibility? Ask us before ordering.

Shipping calculated at checkout · 30-day returns on unused items

Confirm before ordering

This listing is for a tire-only replacement for the TEAC/TASCAM pinch-roller assembly on 32-2B. The metal roller, cap, arm, and bearing are not included.

Compare the removed tire and hub before ordering. Nominal reference: 32 mm outside diameter × 17 mm inside diameter × 13 mm width/wall. Confirm dimensions and hub/profile because production revisions can differ.

Published 50141751/5014175100 references include this model, but the existing hub must still measure approximately 17 mm.

Specifications
Shopify SKU GEN-130-800-TEAC-32-2B
Supplier references 130-800 / HES-130-800
TEAC references 50141751 / 5014175100
Type Replacement rubber pinch-roller tire only
Nominal dimensions Approx. 32 mm OD × 17 mm ID × 13 mm width/wall; measure original
Equipment compatibility

32-2B is supported as a reference for the 130-800 / TEAC 50141751/5014175100 family, subject to the hub/profile check.

Do not assume fit for TASCAM 32, X-3R, or X-3 MkII. Some 30-series revisions use a reduced-height tire and different cap.

The service manual, model plate, and measured original part take precedence.

Part-number cross references
  • 130-800
  • HES-130-800
  • TEAC 50141751 / 5014175100

This is not the complete pinch-roller assembly. Do not substitute 130-801.

Installation & care
  1. Disconnect power and access the assembly according to the service manual.
  2. Remove deteriorated rubber and clean the hub/mating surface.
  3. Install evenly; verify free rotation, alignment, and tape path.