Audio-Technica AT-LPW50BT-RW Replacement Cartridge – AT-VM95E
Replace the complete phono cartridge on your Audio-Technica AT-LPW50BT-RW with the genuine AT-VM95E cartridge and elliptical stylus.
Incoming stock: orders are open. Stock is expected in approximately 1–2 days; dispatch begins after receipt. Contact help@dynamiclamps.com if you need a firm shipping date.
View price and order the AT-VM95E cartridge
Exact model reference
Audio-Technica’s AT-LPW50BT-RW documentation identifies an AT-VM95E cartridge on its original half-inch headshell. Reuse the correct original headshell and align the replacement cartridge according to the turntable manual. This listing supplies the cartridge and stylus only; neither a headshell nor a turntable is included.
This offer supplies the green AT-VM95E cartridge. It is not the AT-VM95E/H headshell assembly.
- Genuine Audio-Technica AT-VM95E dual moving magnet cartridge
- Supplied with green AT-VMN95E bonded elliptical stylus, 0.3 × 0.7 mil
- Standard half-inch cartridge mounting; cartridge mass 6.1 g
- Tracking force: 1.8–2.2 g; manufacturer standard 2.0 g
- Output: 4.0 mV; frequency response 20–22,000 Hz
- Recommended load: 47 kΩ and 100–200 pF
- Headshell is not included
Cartridge or replacement stylus?
If your existing VM95 cartridge body is sound and only the stylus is worn, the separate replacement stylus reference is AT-VMN95E. This offer is the complete AT-VM95E cartridge with stylus. It is not the older AT95E/ATN95E stylus, and it is not a P-mount cartridge. Half-inch mounting alone does not establish compatibility with every turntable.
Setup
Check the exact model, fitted headshell and any previous cartridge changes. Follow the equipment manual to align the cartridge, balance the tonearm, set tracking force and adjust anti-skate. No prealigned headshell assembly is supplied.
Audio-Technica equipment reference · Manufacturer cartridge specifications · Current product price and availability